One of my favorites is a modification of the original hinged stiff rig of Terry Hearn. Pinning effect is the same as chod rig. Consequently occasion curved hook hangs only in the lower juke fish-incredibly effective popup presentation. This installation is made of soft bottoms without relief and grass where you can go with normal lead without it sink to the bottom of the pond.
Even if it is slightly soft bottom installation will work well because of the soft connection between the lead and installation. If you use a hard one, probably the assembly will stand strangely the bottom and will not work properly. This installation is good for people who prefer the aggressive effect of lead in driving the hook using his weight.
The hinged stiff is extremely flexible. Large loops and swivels take care of it. This mobility is the secret of this installation because fish can suck the bait from any direction and will prick the bottom of juke according to AllTimeFishing. Other installations have a shortcoming that they bait to be sucked in a certain way to hook can be pinned to the right place. Due to the high flexibility of installation and to avoid entanglements is good to use PVA. I suggest you use PVA foam or rods and the percentage of entanglements will be reduced to zero.
Step by step: “Hinged-Stiff-Rig”
Materials used: swivel with ring size 11 medium size ring Choddy Haken hook size 6, Dark Matter Putty, MouthTrap 15lb and N-Trap Soft 15lb Tools: Chod-It tool, Pulla, Lighter
Step 1: One of the main components-swivel with a ring size 11 and thereunto medium size ring for fixing the bait late.
Step 2: Stiff MouthTrap chod filament and soft coated N-Trap are a perfect combination.
Step 3: I use MouthTrap and N-Trap soft-both 15lb endurance.
Step 4: reliable Choddy size 6 hooks are a perfect supplement.
Step 5: Cut 15 cm of MouthTrap.
Step 6: Tie Choddy hook with bathroom without toilet.
Step 7: Pass through the ring in the end of Mouth Trap and return it through the eye of the hook.
Step 8: Melt end with a lighter, being careful not to izgoriteStapka 8: Melt end with a lighter, being careful not to burn.
Step 9: In this way the end of Mouth Trap becomes thick and can not be slid off the ear hook
Step 10: Installation D-rig is ready!
Step 11: Tie the swivel with Rapala knot.
Step 12: To receive a perfect noose use Chod-It tinstrument.
Step 13: Same tool helps to make and perfect “D” on the hook.
Step 14: Cut a length desired by N-Trap.
Step 15: Tie N-Trap for the swivel, use Rapala knot again.
Step 16: You have to look that way.You have a double hinge that provides quick smash the hook.
Step 17: Detach the required amount Dark Matter putty and put it around knots. Try buoyancy installation in shallow.
Step 18: Make sure the installation moves freely.
Step 19: Complete assembly with a loop at its end.
Step 20: You now have ready installation.
Installation Art Made from Fabric Mimics a Dark, Stormy Ocean
Two lures installation scheme
Columbia River Fish Trap Compact Winch for Idaho Fish …
CZ 452 boreguide
North Sea Scenery for FSX
Polaris General™ 1000 GP Rack™ (General Purpose …
Blaser shotgun – one of the best in the world
DEXTER 96 in. Round Tube 4 in. Drop Trailer Axle (3500 lb …
175 AMP Battery Connector Jump Start Slave Assist Pair RED …
Motorcycle Solenoid Starter Motor Relay JDQ-1 For Honda …
CASTLECREEK Retractable Awning
Amazing Cool Wallpapers
Infographic: 2014 Dana Point Chamber Performance Report …
Kaena Point Satellite Tracking Station
No Smoking In The Park Sign
Ernesto Neto – Artists
Network Survivability for Alaska: AKORN
Yamaha Outboard Gauges Wiring Diagram – davehaynes.me
Happy Face Die Cut Vinyl Decal PV430